User’s Manual
SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND BASE:
1.Disconnect all the cables and cords from the Monitor to prevent breakage.
2.Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor.
3.Gently remove the stand base.
(For reference only)
WALL MOUNTING THE MONITOR:
1.Purchase a VESA compatible wall bracket: VESA 100X100, 4 holes, M4, 10mm, 8kg.
2.Locate your ideal Monitor position on the wall.
3.Fix the wall bracket firmly on the wall.
4.Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.
Note:
•Please read the instructions of your specific wall bracket to properly wall mount the Monitor.
•The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
•The screws type required is metric: M4, 10mm length.
•The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base.
*Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask a qualified service personnel about using an optional bracket to mount the Monitor to the wall.
9