HANNspree HF257 manual Position Clock Phase Sharpness Video Mode Response Time

User’s Manual

H-POSITION

V-POSITION

CLOCK

PHASE

SHARPNESS

VIDEO MODE

RESPONSE TIME

OSD SETTING

LANGUAGE

H-POSITION

V-POSITION

TRANSPARENCY

OSD TIME-OUT

Select the「H-POSITION」option to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only]

Select the 「V-POSITION」option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only]

Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]

Select the「PHASE」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]

Select the「SHARPNESS」option to adjust the sharpness of the display. Set the value from -2 to 2.

Choose「VIDEO MODE」or 「PC MODE」for video transmission. While using HDMI or HDMI to DVI ports for video transmission, the video will appear cut off slightly around the edge; choose「PC MODE」to view videos with complete image. (VIDEO MODE only functions for inputs from HDMI or DVI that supports HDCP video (YUV format))

Setup the display response time through the Response time function. Available settings are MINIMUM, INTERMEDIATE, and MAXIMUM. [This feature is limited to specific models only.]

Select 「LANGUAGE」 option to change the language of the OSD. Enter the option and select a language. [Reference only, the OSD Language depends on the selected model]

Select「H-POSITION」option to adjust the horizontal position of the OSD. Enter the option and adjust the level.

Select 「V-POSITION」option to adjust the vertical position of the OSD. Enter the option and adjust the level.

Select 「TRANSPARENCY」option to adjust the transparency of the OSD. Enter the option and adjust the level.

Select 「OSD TIME-OUT」option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level.

16