Avalon Acoustics OPUS Ceramique Loudspeaker manual Replacing Grille Pins

Page 9

2.3 Replacing Grille Pins

The grille pins installed on the grille assemblies are fragile and can be easily damaged. Should any of the pins break, you may replace them using the following procedure.

1.Place the grille assembly face-down on a padded surface (a towel or carpeting).

2.Remove the damaged grille pin by pulling it straight out with a small pliers or similar tool. Please refer to figure 2.4. Make sure that the complete pin is removed and that there are no pin fragments left in the mounting hole.

Figure 2.4 - Removal of broken grille pin. Check for pin fragments in the mounting hole.

3. Insert the new grille pin in the grille pin installation tool (see figure 2.5).

Figure 2.5 - Insertion of new grille pin into installation tool.

Image 9

Contents Music al Master piec es Page Table of Contents Features Introduction Contents Unpacking InstructionsIntroduction To unpack the loudspeakers Opening the CrateOrientation of the Felt Anti-Diffraction Mask Installing the GrillesInsertion of new grille pin into installation tool Replacing Grille PinsPage Wiring Instructions Connecting the Speaker to the AmplifierDo not over-tighten the screws From Amplifier Break-in Period Speaker Placement and Symmetry Maximizing PerformanceGrille Assemblies Apex Couplers Toe-InCorner Treatment First Reflection PointsCare of Your Loudspeakers Grille AssemblyCabinet Hardwood Finish DriversEvent of a Problem WarrantyWarranty Statement Page Room AcousticsandSpeaker Position Basic Room Acoustics An Optical AnalogyStanding Waves Flutter Echo Early Reflections Avoiding Early Reflections Angle X Angle Y Reflected Sound DirectSound Bass reinforcement 100 200 500 Page Flutter Echo and Standing Waves Summary of RecommendationsEarly Reflections Speaker PlacementListening Room Example Accuracy of Bass Reproduction Fast Bass Sensitivity to Time-Related InformationAnechoic vs. In-Room Frequency Response RationaleCorrelation with Amplifier Measurements Measurements of Audio EquipmentLoudspeaker Measurements Designing for Accurate Bass Reproduction Listening for Size Distortions Frequency Response EffectsTransient Response Effects Conclusion Features Specifications

OPUS Ceramique Loudspeaker specifications

Avalon Acoustics is renowned in the high-end audio industry, and their OPUS Ceramique Loudspeaker exemplifies their dedication to exceptional sound quality and innovative design. This speaker is a perfect blend of artistry and advanced engineering, making it a coveted choice among audiophiles.

One of the key features of the OPUS Ceramique is its sophisticated driver configuration. It utilizes a three-way design, which is engineered to deliver a full spectrum of sound with impressive clarity. The loudspeaker is equipped with a 10-inch ceramic bass driver capable of deep, powerful low frequencies, ensuring that every note resonates with depth. Complementing this are dual midrange drivers made from advanced ceramic materials, which provide rich and warm mid tones. Finally, for the highs, the OPUS employs a unique ribbon tweeter designed for exceptional detail and an extended frequency response, offering a natural and airy sound that brings music to life.

The cabinet design of the OPUS Ceramique is as remarkable as its internal components. It features a rigid construction that minimizes resonance and cabinet coloration, ensuring that the sound remains pure and true to the source. The elegant curves of the speaker not only enhance its aesthetic appeal but also contribute to better acoustic performance by optimizing the dispersion of sound waves.

Another prominent technology incorporated in the OPUS Ceramique is its advanced crossover network. The crossover is meticulously engineered to ensure a seamless transition between the drivers, allowing for coherent sound reproduction across all frequencies. This means that listeners can enjoy an immersive soundstage where instruments and vocals are clearly delineated, creating a more engaging listening experience.

In addition to its acoustic prowess, the OPUS Ceramique is designed with the audiophile in mind. It is highly customizable, with various finishes available to suit any decor. The attention to detail extends to every aspect of its construction, providing both aesthetic beauty and functional performance.

Overall, the Avalon Acoustics OPUS Ceramique Loudspeaker stands as a testament to the brand's commitment to delivering extraordinary sound and elegance. With its innovative technologies and exceptional build quality, it continues to be a sought-after choice for discerning music lovers seeking the ultimate audio experience. Whether used in a dedicated listening room or as part of a high-end home theater system, the OPUS Ceramique promises to elevate any audio experience to new heights.