User’s Manual, Osd Setting | Hanns.G HSG1033 manual

User’s Manual

H-POSITION

V-POSITION

CLOCK

PHASE

SHARPNESS

HDMI MODE

Select the「H-POSITION」option to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only]

Select the 「V-POSITION」option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only]

Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]

Select the「PHASE」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]

Select the「SHARPNESS」option to adjust the sharpness of the display. Set the value from -2 to 2.

Transferring audio-video image by HDMI port would

cause edges of the image being cut on the screen; select「PC Mode」to display in full screen. Enter the option and select

「VIDEO Mode」(VIDEO) or 「PC Mode」(PC). [For HDMI Input only]

RESPONSE TIME

OSD SETTING

Setup the display response time through the Response time function. Available settings are MINIMUM, INTERMEDIATE, and MAXIMUM. [This feature is limited to specific models only.]

LANGUAGE

H-POSITION

V-POSITION

TRANSPARENCY

OSD TIME-OUT OSD COLOR

Select 「LANGUAGE」 option to change the language of the OSD. Enter the option and select a language. [Reference only, the OSD Language depends on the selected model]

Select「H-POSITION」option to adjust the horizontal position of the OSD. Enter the option and adjust the level.

Select 「V-POSITION」option to adjust the vertical position of the OSD. Enter the option and adjust the level.

Select 「TRANSPARENCY」option to adjust the transparency of the OSD. Enter the option and adjust the level.

Select 「OSD TIME-OUT」option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level.

To choose the color combination of the OSD window, select