Green House WGA54G manual IP Address, Advanced

Page 16

Instant Wireless® Series

•Keys 1-4- If you are not using a Passphrase, then you can enter one or more WEP keys manually.

In each key field, manually enter a set of values. (Do not leave a key field blank, and do not enter all zeroes. These are not valid key values.) If you are using 64-bit WEP encryption, then each key must consist of exactly 10 hexadecimal characters in length. If you are using 128-bit WEP encryption, then each key must consist of exactly 26 hexadecimal characters in length. Valid hexadecimal characters are “0”-“9” and “A”-“F”.

Click the Apply button to save your changes. If your page doesn’t automati- cally refresh itself, then click the Refresh button of your web browser. Click the Cancel button to cancel your changes. Click the Help button for addition- al on-screen information.

Advanced

Use the Advanced Settings screen to customize advanced wired and wireless settings, clone a MAC address onto the Game Adapter, change the password, and restore default settings.

IP Address

•Obtain IP Address automatically (DHCP). If your network assigns IP addresses via DHCP, select this setting.

•Use the following IP settings. Select this setting if your network uses stat- ic IP Addresses:

IP Address. The IP address must be unique to your network. We suggest you use the default IP address of 192.168.1.245. This is a private IP address, so there is no need to purchase a separate IP address from your service provider. Verify the address and click the Apply button to save changes.

Subnet Mask. The Game Adapter’s Subnet Mask (or IP Mask) must be the same as your Ethernet network. Verify this is correct and click the Apply button to set it.

Gateway. If your network does not have a Gateway, then leave this field blank.

Wireless-G Ethernet Bridge

Figure 7-4

Note: You may have to refresh this page to see any new settings.

•Transmission Rate - The default setting is Auto. The range is from 1 to 54Mbps.

The rate of data transmission should be set depending on the speed of your wireless network. You can select from a range of transmission speeds, or you can keep the default setting, Auto, to have the Game Adapter automat- ically use the fastest possible data rate and negotiate the best possible con- nection speed between the Game Adapter and another wireless-equipped device.

24

25

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Wireless-G Game Adapter Copyright & Trademarks Table of Contents Features Wireless-G Game AdapterIntroduction Wireless-G Game Adapter’s Back Panel Wireless-G Game Adapter’s LEDsAd-Hoc versus Infrastructure Mode Planning Your Wireless NetworkNetwork Topology Setting Up the Wireless-G Game Adapter for Network Play Fast Setup for Head-to- Head PlayConnecting the Game Adapter to Your PC Starting the Setup Wizard from Your PC Easy Setup Wizard Configuration for Head-to-Head PlayAdvanced Setup Wizard Configuration for Head-to-Head Play Instant Wireless Series Setup Wizard Configuration for Internet Play Bit WEPInstant Wireless Series Overview Connecting the Game Adapter to Your Game ConsoleStarting the Web-based Utility Setup WEP Encryption IP Address AdvancedHelp Common Problems and Solutions Appendix a TroubleshootingFrequently Asked Questions Appendix B Glossary Instant Wireless Series Appendix C Specifications EnvironmentalAppendix D Warranty Information Appendix E Contact InformationCopyright 2003 Linksys, All Rights Reserved
Top Page Image Contents