Global Upholstery Co 2807840 user manual Glossary, Cmos RAM Clear 3-pin Jbat

Page 11

(3)CMOS RAM Clear (3-pin): JBAT

A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2 pins of JPAT to store the CMOS data.

To clear the CMOS, follow the procedure below:

1.Turn off the system and unplug the AC power

2.Remove ATX power cable from ATX power connector

3.Locate JBAT and short pins 2-3 for a few seconds

4.Return JBAT to its normal setting by shorting pins 1-2

5.Connect ATX power cable back to ATX power connector

Note: When should clear CMOS

1.Troubleshooting

2.Forget password

3.After over clocking system boot fail

JBAT 1

3

JBAT 1

3

1-2 closed

Normal (Default)

2-3 closed

Clear CMOS

CMOS RAM Clear Setting

2-3 Glossary

Chipset (core logic) - two or more integrated circuits which control the interfaces between the system processor, RAM, I/O devises, and adapter cards.

Processor socket - the socket used to mount the system processor on the motherboard. Slot (AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.

AGP - Accelerated Graphics Port - a high speed interface for video cards; runs at 1X (66MHz), 2X (133MHz), or 4X (266MHz).

PCI - Peripheral Component Interconnect - a high speed interface for video cards, sound cards, network interface cards, and modems; runs at 33MHz.

Serial Port - a low speed interface typically used for mouse and external modems. Parallel Port - a low speed interface typically used for printers.

PS/2 - a low speed interface used for mouse and keyboards.

USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards, scanners, and some digital cameras.

Sound (interface) - the interface between the sound card or integrated sound connectors and speakers, MIC, game controllers, and MIDI sound devices.

BIOS (Basic Input/Output System) - the program logic used to boot up a computer and establish the relationship between the various components.

Driver - software, which defines the characteristics of a device for use by another device or other software.

Processor - the "Central Processing Unit" (CPU); the principal integrated circuit used for doing the "computing" in "personal computer"

Front Side Bus Frequency - The working frequency of the motherboard, which is generated by the clock generator for CPU, DRAM and PCI BUS.

6

Image 11
Contents User’s Manual Mini-ITX Motherboard Version 5.0, August Copyrights Environmental Protection Announcement Introduction of VIA CN700 Chipset Motherboard Reversion Revision History Date Fifth Edition Aug Item ChecklistManual Revision Information Chapter Specification VGA LINE-IN USB Layout Diagram & Jumper SettingJumpers USB Power On function Enabled/Disabled 3-pin JP3 Hardware installation StepsChecking Motherboard’s Jumper Setting Keyboard Power On function Enabled/Disabled 3-pin JP1Cmos RAM Clear 3-pin Jbat GlossaryOver clock Running Setting CPU Bus Clock & Memory Clock JumperSetting the front side bus frequency and Sdram frequency Total Memory Install MemoryValid Memory Configurations Bank Pin Dimm Interrupt Request Table For This Motherboard Procedure For Expansion Card InstallationExpansion Cards Assigning IRQs For Expansion Card2PS/2 Mouse & PS/2 Keyboard Connector KB/MS1 Connectors, HeadersConnectors Power Connector 24-pin block AtxpwrAudio Connector Line-Out/ Line-IN/ MIC USB Port connector UL1 / UL2Serial Port Connector 9-pin female COM1 VGA Connector 15-pin female VGALine-Out, MIC Header 9-pin Audio HeadersCOM2 Serial Port Headers 9-pin COM2 Parallel Port Headers 25-pin Block Parallel9Power switch PWR BTN Reset switch lead ResetSpeaker connector Speak Power LED PWR LED11CD Audio-In Headers 4-pin Cdin 10FAN Speed Headers 3-pin CPUFAN, SFAN1/SFAN2Beep Meaning Starting Up Your Computer