Global Upholstery Co 2807840 Hardware installation Steps, Checking Motherboard’s Jumper Setting

Chapter 2

Hardware installation

2-1 Hardware installation Steps

Before using your computer, you had better complete the following steps:

1.Check motherboard jumper setting

2.Install CPU and Fan

3.Install System Memory (DIMM)

4.Install Expansion cards

5.Connect IDE and Front Panel /Back Panel cable

6.Connect ATX Power cable

7.Power-On and Load Standard Default

8.Reboot

9.Install Operating System

10.Install Driver and Utility

2-2 Checking Motherboard’s Jumper Setting

(1)Keyboard Power On function Enabled/Disabled (3-pin): JP1

When setting Enabled you can using keyboard by key in password to power on system.

JP1	1
	3
1-2 closed	K/B Power ON Disable
(Default)

JP1	1
	3
2-3 closed	K/B Power ON Enabled

Keyboard Power On Setting

(2)USB Power On function Enabled/Disabled (3-pin): JP3

When setting Enabled you can using USB Device to power on system.

1 3

JP3

1 3

JP3

1-2 closed	USB Power On Disabled (Default)
2-3 closed	USB Power On Enabled

5