Genius HR6A manual Only use normal paper in the ADF. The ADF does not support

Page 19

position to provide further support for the paper.

Extension Arm

Figure 8. Sliding the Extension Arm

3.Make sure the paper being loaded is completely flat with no creased corners, etc. Also remove any staples if present, before loading the page into the ADF.

4.Load the documents face-down into the ADF. The left side of the paper should touch the left side of the ADF. The documents should be all the way into the ADF, touching the bottom.

	Only use normal paper in the ADF. The ADF does not support
	transparencies. Please refer to Appendix B: Specifications at the
Attention	back of this manual for more detailed information about the
Attention	different types of paper that can be loaded into the ADF.

5.Adjust the paper width slider for the paper size you are using. The paper width slider should be gently touching the right side of the documents.

The loaded documents should now be bordered on 3 sides; the bottom should be all the way in the ADF touching the bottom, the left side should be touching the left wall of the ADF and the right side should be touching the paper-width slider.

	•	Although the documents should be loaded firmly in place ensuring
		optimum scanning accuracy, they should never be wedged in so tightly
Attention		that the process of feeding them through the scanner is strained.
Attention	•	The ADF cover should be kept closed when not in use. Make sure to
		return the extension arm to its down position before closing the cover

Genius ColorPage-HR6A Scanner

17

Image 19

Contents User’s Guide Table of Contents Introduction Conventions of this Guide How to Use This GuideGenius ColorPage-HR6A Scanner System Requirements Package Contents Chapter I. Installing Genius ColorPage-HR6A Scanner Software Requirements Installing and Setting up the ScannerHardware Requirements Installing the ColorPage-HR6A Scanner An available USB port Type a Connector Type B ConnectorSoftware Installation Uninstalling the Scanner Installing Additional SoftwareChapter II. Usage and Maintenance Scanner Utility Program Aligning the Scanner Connection StatusLamp Control ADF scanning is limited to 200 to 600 dpi Using the ADF Auto Document FeederIntended flatbed source Back of this manual for more detailed information about Only use normal paper in the ADF. The ADF does not supportDifferent types of paper that can be loaded into the ADF Autocrop Scan Pad ScanningScan and Image Editing From image-editing software Chapter III. How to Use Quick Function Buttons To use Scan Button Function Buttons SettingScan Button Email/Web ButtonTo use Email/Web Button for Scan to Email function To set a default Simple Mapi client i.e. Outlook ExpressTo set up Email/Web Button as Scan to Email function To set up Email/Web Button as Scan to Web functionPrint/Copy Button Text/OCR ButtonTo use File/Fax Button as Scan to File function To set up PC Fax softwareTo set up File software File/Fax ButtonPageManager Window Open Maintenance General Appendix a SpecificationsAppendix B Customer Service and Warranty Statement of Limited Warranty FCC Radio Frequency Statement KYE Systems Corp Contacting GeniusKYE International Corp KYE Systems Europe GmbH