Accessing the TCP/IP Print Server Configuration Utility
From the Print Server Monitor Screen, press the F3 key to exit to a DOS prompt. From a DOS prompt:
Type “1” and Press ENTER.
If the configuration screen did not appear, locate the RIC directory on the Print Server’s hard drive. A typical Print Server would have the directory at “C:\RIC”. Using the DOS Change Directory command “CD\RIC”, change to the RIC directory. Type “PRTCNF” and Press
ENTER
TCP/IP Print Server Configuration Utility
File Configure Help
MENUS
FILE | SAVE BACKUP RESTORE PRINT EXIT |
CONFIGURE IP STACK NETWORK PARAMETERS PRINTER PORTS MANUAL OVERRIDE
HELP
IMPORTANT!! Always SAVE changes to configurations BEFORE exiting the Print Server Configuration Utility.
TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr) | 4 |