Installation

SB-1000 MANUAL

SB-1000 E Rear Panel

Remote	TEL/MODEM		INPUT
Port	IN	OUT	INPUT
Port	IN	OUT
		BREAKER		BYPASS	UPS2	UPS1
				BYPASS	UPS2	UPS1
1	2	3	4	5	6	7

Inspect the UPS upon receipt. Any damage to the packaging or unit is not covered under warranty. Contact your parcel carrier.

1) Recharge the batteries

The UPS may be used immediately upon receipt. Recharging the batteries at least eight hours before using the UPS is recommended. Energy loss may occur during shipping or storage. To recharge the battery, simply plug the UPS into an AC outlet. Once the power cord is connected, the UPS batteries will automatically start charging.

2) Connect the loads

Plug your primary equipment into the battery power-supplied outlets UPS 1 and UPS 2 . Plug your peripheral equipment to the bypass outlet. Do not plug high-current equipment such as power ampliﬁers, projectors, and large mixing consols into the UPS 1 or 2 outlets, as they may cause the circuit breaker to trip. It is recommended that heavy loads be connected to the bypass outlet.

3) Connect the telephone

If you wish to protect a fax or modem, connect the telephone cable from the wall outlet to the “IN” jack. Connect the telephone cable (provided) from the “OUT” jack to the fax or modem. These ports are not for network protection.

4) Connect to the utility power

Plug the UPS to a grounded AC receptacle.

Avoid using extension cords. If used, make sure they are rated for at least 15 amps.

5) UPS self-test

The UPS will conduct a self-test each time it is switched on. Do not add or remove any equipment while the UPS conducts this self- test; wait until the Power indicator lights up, once completed, switch on your equipment.

6) Overload protection

If an overload situation (more than 5 amps load) is detected during self-test, the UPS audible alarm will activate, emitting a long beep and then will automatically shut down the system. If this occurs, unplug at least one piece of equipment from the battery supplied outlets. Switch off the UPS, wait 5 seconds and check to make sure the circuit breaker is set, then switch it on again.

7) Optimal battery status

To maintain the optimal status of the battery, leave the UPS plugged in at all times.

8) Self-protection feature

The UPS is equipped with a self-protection feature which prevents people from tampering with the unit and subsequently damaging it. It is programmed so that once it is switched off, the user must wait 5 seconds before switching it on again.

9) Storage

Cover and store the UPS with the battery fully charged. During extended storage, recharge the batteries every three months to ensure battery life.

SB-1000 specifications

The Furman Sound SB-1000 is a powerful subwoofer designed to deliver exceptional low-frequency performance in various audio environments. Known for its robust build and advanced technology, the SB-1000 has become a popular choice among audio professionals and enthusiasts alike.

One of the standout features of the SB-1000 is its high-efficiency Class D amplifier. The amplifier delivers a staggering output of up to 1,000 watts peak power, which ensures that the subwoofer can produce deep, punchy bass without distortion, even at high volume levels. This makes it ideal for live sound reinforcement, home theater applications, and music production.

The SB-1000 utilizes a proprietary 12-inch high-excursion driver that is engineered for controlled and precise bass response. The driver is designed to handle the rigors of professional use, with a durable construction that can withstand the demands of touring and other strenuous applications. Its large voice coil and exceptional suspension design allow the driver to move large amounts of air, resulting in dynamic bass that can fill a room or outdoor space with rich sound quality.

Another notable feature of the SB-1000 is its adjustable crossover frequency control. This allows users to tailor the subwoofer's performance to match their specific audio setup, whether it's paired with satellite speakers in a theater system or larger PA cabinets in a concert venue. The crossover control facilitates seamless integration with other speakers, ensuring a balanced and cohesive listening experience.

The subwoofer's design also addresses the importance of aesthetics and functionality. The SB-1000 features a sleek, modern enclosure made from high-quality materials that not only enhance durability but also minimize resonance and unwanted vibrations. Additionally, it is equipped with rubber feet that provide stability while preventing floor damage and vibrations from affecting other equipment.

Moreover, the SB-1000 includes multiple input options, including XLR and RCA connectors, making it versatile for various audio systems. This flexibility ensures compatibility with a wide range of audio sources, including mixers, processors, and consumer electronics.

In summary, the Furman Sound SB-1000 is a top-tier subwoofer characterized by its high-efficiency amplifier, advanced driver technology, customizable crossover settings, and robust construction. Whether used in a professional setting or for personal enjoyment, the SB-1000 delivers powerful, precise, and exhilarating bass that enhances any audio experience.