Furman Sound PS-PRO HT owner manual Features, Introduc Tion

PS - PRO HT - POWER CONDITIONER/SEQUENCER

FEATURES

20 amp (2400 watt) rating handles even the largest power amplifiers.

Multiple levels of protection compo- nents can safely absorb large voltage spikes and provide highly effective RFI / EMI filtering.

Extreme Voltage Shutdown guards against catastrophically high volt- ages.

Power Status LED’s indicate which outlet groups have power.

Remote operation allows turn-on and turn-off at a distance simply by con- necting a momentary or maintained- contact switch (and LED if desired).

Multiple units may be linked to handle higher currents and/or more than three delay groups.

Three unswitched outlets (one front, two rear).

	Ten
	foot 12 AWG heavy duty power cord.

Three year limited warranty.

INTRODUC TION

Congratulations on your pur- chase of a Furman PS-PRO HT Power Conditioner/Sequencer. The PS-PRO HT offers maximum protection from AC line hazards faced by delicate ana- log and digital A/V equipment.

The PS-PRO HT is a power se- quencer, meaning it is capable of powering a full systems equipment in three steps separated by timed delays. It is useful whenever various kinds of equipment must be powered up or down in groups, rather than all simultaneously.

DESCRIPTION

In audio systems, sequenced powering is often necessary to allow turn-on transients from low level amplifiers and processors to settle down before any power amps are turned on, because simultaneous powering results in a loud, annoy-

1