PS - PRO HT - POWER CONDITIONER/SEQUENCER
PS-PRO HT SPECIFICATIONS
Current rating: | 20 Amps (2400 Watts at 120 VAC) |
Input Voltage: | 85 to 264 VAC without damage |
Mains Wiring analyzer: Detects one normal mode and five fault modes | |
Delay Intervals: | Total elapsed ON or OFF delay time adjustable |
| from |
ON sequence: | Delay 1 outlets go on immediately with switch. |
| Delays between outlets 1 and 2, and 2 and 3, |
| adjustable from |
OFF sequence: | Delay 3 outlets go off immediately with switch. |
| Delays between outlets 3 and 2, and 2 and 1, |
| same as ON delays |
Remote Switch: | Screw terminals, 2 for switch, 2 additional for |
| optional LED (22 ga. minimum) |
Spike Protection Modes:Line to neutral | |
Clamping Voltage, all modes: | 180V peak |
Response time: | 1 nanosecond |
Maximum surge current: | 11,000 amps (8 x 20mS pulse) |
Maximum spike energy: 550 joules total | |
Noise attenuation: | Differential mode: greater than 60 dB; 1 to 200 |
| MHz |
Dimensions: | 1.75” H x 19”W x 10” D. |
Weight: | 6 lbs (2.7 kg). |
Construction: | Steel chassis, zinc chromate plating; .125” |
brushed and black anodized aluminum front panel; | |
glass epoxy printed circuit boards. | |
Power Consumption: | 11 watts |
Safety Agency Approvals: | UL, |
10