![](/images/new-backgrounds/1192690/19269015x1.webp)
Specifications
Plug-in Expansion Cards
Component description | ||
|
| |
Operating temperature | ||
|
| |
Storage temperature | ||
|
| |
Analog output card | 4 x analog current outputs | |
Terminals max. 1.5 mm2 (AWG15) | ||
| ||
|
| |
Analog/digital input card | 4 x analog/digital inputs | |
| 4 x change over contacts (SPDT) | |
Internal relay card | Maximum switching voltage: 250 VAC, 125 VDC | |
Nominal Switching Current: 250 VAC, 5 A; 125 VAC, 5 A; 30 VDC, 5 A | ||
| ||
| Terminals max. 1.5 mm2 (AWG15) | |
|
| |
Fieldbus interface card | Modbus RS485 (YAB021), Modbus RS232 (YAB047) or Profibus DP (YAB020) | |
|
| |
DIN Rail Switch Cabinet Expansion Modules | ||
|
| |
Function | For installation in the switch cabinet. Any expansions required can be combined | |
when a base module is available. | ||
| ||
|
| |
Enclosure rating | IP20 | |
|
| |
Power supply | 24 VDC (max. 30 V) from base module | |
|
| |
Operating temperature | 4 to 40 °C (39 to 104 °F); 95% relative humidity, | |
|
| |
Storage temperature | ||
|
| |
| Supply of expansion modules with 24 VDC and connection to the sc1000 | |
| network | |
| Setting terminating resistor (with DIP switch) for the sc1000 network | |
Base module (LZX915) | Provision of connection for a display module (LXV402) for the configuration of | |
| the system | |
| Base module can supply a maximum of 2000 mA to the extension modules. | |
|
| |
| Dimensions: 23 x 100 x 115 mm (1 x 4 x 4.5 in.) | |
|
| |
| 4 x normally closed into change over contacts (SPDT) | |
| Maximum switching voltage: 250 VAC, 125 VDC | |
| Maximum switching current: 250 VAC, 5 A; 125 VAC, 5 A; 30 VDC, 5 A | |
| Maximum switching power: 150 W | |
Relay module (LZX920) | Can be programmed for limit, | |
| communication status indication by LED. | |
| Terminals max. 2.5 mm2 (AWG 11) | |
| Current consumption: <100 mA | |
|
| |
| Dimensions: 45 x 100 x 115 mm (2 x 4 x 4.5 in.) | |
|
| |
| 2 analog current outputs | |
Output module (LZX919) | Terminals max. 2.5 mm2 (AWG 11) | |
Current consumption: <150 mA | ||
| ||
|
| |
| Dimensions: 23 x 100 x 115 mm (1 x 4 x 4.5 in.) | |
|
| |
| Analog/Digital inputs (can be programmed as | |
| digital INPUT | |
Input module (LZX921) | Internal resistance: 180 Ohm | |
Terminals max. 2.5 mm2 (AWG 11) | ||
| ||
| Current consumption: <100 mA | |
|
| |
| Dimensions: 23 x 100 x 115 mm (1 x 4 x 4.5 in.) | |
|
|
6