![](/images/new-backgrounds/1192690/192690233x1.webp)
Advanced Operations
6.3.6 Device management
The Device Management menu contains all settings for administering devices which are connected to the sc1000 controller. For information on adding new devices/probes refer to section 5.11 on page 61.
SYSTEM SETUP
DEVICE MANAGEMENT
| DEVICE LIST |
| Lists all probes and modules which are installed and registered in the sc1000 controller. |
|
|
|
|
| SCANNING FOR NEW |
| Scans for new probes and modules. |
| DEVICES |
| |
|
|
| |
|
|
|
|
| DELETE DEVICES |
| Removes selected probes and devices from the sc1000 controller. |
|
|
|
|
| EXCHANGE DEVICE |
| Copy device settings and internal relations to modules from a specified device to a new device |
|
| used for replacement. | |
|
|
| |
|
|
|
|
| SAVE DEVICE |
| Stores the device settings in the internal memory. |
|
|
|
|
| RESTORE DEVICE |
| Restores device settings from the internal memory. |
|
|
|
|
| SAVE ALL DEVICES |
| Stores a complete save set of all device settings. |
|
|
|
|
| RESTORE ALL |
| Restores a complete save set of all device settings. |
| DEVICES |
| |
|
|
| |
|
| Note: If a probe does not support the SAVE/RESTORE option, the error message “FAIL” is | |
|
| displayed. |
6.3.7 Display settings
The Display settings menu controls the touch screen settings of the sc1000 controller.
SYSTEM SETUP
DISPLAY SETTINGS
| LANGUAGE | Selects the appropriate language to be displayed on the screen. | |
|
|
| |
| BACKLIGHT |
| |
|
|
|
|
|
| BACKLIGHT OFF | Backlight is switched off, display background becomes black |
|
|
|
|
|
| SWITCH ON | Default value: 00:00 |
|
| Enter the start time. | |
|
|
| |
|
|
|
|
|
| SWITCH OFF | Default value: Never |
|
| Enter the stop time. | |
|
|
| |
|
|
|
|
|
| BRIGHTNESS | Default value: 100% |
|
| Select a High, Medium, or Low brightness. | |
|
|
| |
|
|
|
|
| DATE/TIME | Select the date format and set the date and time | |
|
|
| |
| LOCATION | Enter the information on the location of the device. | |
|
|
| |
| TOUCHSCREEN | The touch screen calibration displays a set of calibration points. Touch each calibration point to | |
| CALIBRATION | calibrate the touch screen for the current operator. |