Standard Operations

5.8 Set the time and date

To set the time (24-h-format):

1.Select SYSTEM SETUP, DISPLAY SETTINGS, DATE/TIME.

2.The keypad is displayed.

3.Enter the time using the keypad and press ENTER to confirm.

To set the date and the date format:

1.Select SYSTEM SETUP, DISPLAY SETTINGS, DATE/TIME.

2.Select FORMAT. From the list box, select the date format to be displayed and press the ENTER button to confirm.

3.Select DATE. The keypad is displayed.

4.Enter the date using the keypad and press ENTER to confirm.

5.9Set up system security (passcode protection)

By setting a passcode the sc1000 controller restricts unauthorized access. The passcode can include up to 16 digits (alpha and/or numeric and available characters). The passcode protection is activated as soon as the sc1000 controller is in measurement mode. The passcodes can be entered as a log on passcode when accessing the sc1000 controller with a web browser access or GSM modem. By default no passcode is set.

There are two passcode options:

MAINTENANCE

The Maintenance passcode protects the Device Management and Security Setup menus.

SYSTEM

The System passcode is the master passcode and protects the complete System Setup menu. A user with a maintenance passcode cannot delete or edit a system passcode.

The System passcode can be entered at any sc1000 controller log on screen.

5.9.1 Set the passcode

To enter a passcode:

1.Select SYSTEM SETUP, SYSTEM SECURITY.

2.Select Maintenance or System.

3.Press ENTER.

4.Enter a passcode.

5.Confirm with ENTER.

60

Page 62
Image 62
Hach sc1000 user manual Set the time and date, Set up system security passcode protection, Set the passcode