Section 6 Advanced Operations
The following section describes all software settings for the sc1000 controller. The software settings from the Main Menu include:
•SENSOR STATUS
•SENSOR SETUP
•SYSTEM SETUP
•TEST/MAINT
6.1Sensor status menu
The sensor status menu lists errors and warnings of all connected probes/devices. If a probe is displayed in red, an error or a warning has been detected.
SENSOR STATUS
Select Device
|
| Displays a list of errors currently present in the probe. | |
| ERROR LIST | If the entry is marked red an error is detected. | |
|
| Refer to the appropriate probe manual for more information. | |
|
|
| |
|
| Displays a list of warnings currently present in the probe. | |
| WARNING LIST | If the entry is marked yellow a warning is detected. | |
|
| Refer to the appropriate probe manual for more information. | |
|
|
| |
MESSAGE LIST | Displays a list of warnings currently present in the probe. | ||
Refer to the appropriate probe manual for more information. | |||
|
| ||
|
|
| |
6.2 Sensor setup menu
The sensor setup menu lists all connected probes. Refer to the appropriate probe manual for probe specific menu information.
77
