Installation

3.6 Expansion cards

The sc1000 controller can be expanded with internal plug-in expansion cards. Each expansion component can be identified with its serial number on the sc1000 network and programmed as required. The serial number is located on the card.

It may be necessary to remove an existing expansion card, if the expansion card is blocking access to certain connectors. Refer to section 3.6.6 on page 37 for more information.

When an instrument is ordered, it comes pre-installed with the appropriate plug-in expansion cards. The following options can be connected:

Relay card with 4 relays

Digital field-bus cards (Modbus (RS485), Modbus (RS232), Profibus DP)

mA output card with 4 outputs

mA input card with 4 inputs (analog or digital)

sc-probe connectors

Figure 17 Expansion card main circuit board connections

1

Main circuit card

5

Mounting holes, input cards (4 each)

2

Connector for expansion slot #2

6

sc probe connections

 

 

 

 

3

Connector for expansion slot #3

7

Relay card connection

4Connector for expansion slot #4

27

Page 29
Image 29
Hach sc1000 user manual Expansion cards, Expansion card main circuit board connections