
Installation
Figure 5 Remove display module and probe module cover
1 | Probe module cover | 3 | Connector, display module |
|
|
|
|
2 | Display module | 4 | Screw (4x) |
|
|
|
|
3.3.1
Electrostatic discharge (ESD) considerations
Important Note: To minimize hazards and ESD risks, maintenance procedures not requiring power to the analyzer should be performed with power removed.
Delicate internal electronic components can be damaged by static electricity, resulting in degraded instrument performance or eventual failure. The manufacturer recommends taking the following steps to prevent ESD damage to your instrument:
•Before touching any instrument electronic components (such as printed circuit cards and the components on them) discharge static electricity from your body. This can be accomplished by touching an
•To reduce static
•To discharge static electricity from your body and keep it discharged, wear a wrist strap connected by a wire to earth ground.
•Handle all
15