Standard Operations
| Table 15 | Error register | |
|
|
|
|
Bit | Error |
| Description |
|
|
|
|
5 | Hardware error |
| Hardware error detected. |
|
|
|
|
6 | Internal communication error |
| A communication failure within the device has been |
| detected. | ||
|
|
| |
|
|
|
|
7 | Humidity error |
| Excessive humidity has been detected. |
|
|
|
|
8 | Temperature error |
| Temperature within the device exceeds specified limit. |
|
|
|
|
10 | Sample warning |
| Some action is required with the sample system. |
|
|
|
|
11 | Questionable calibration warning |
| The last calibration was of questionable accuracy. |
|
|
|
|
12 | Questionable measurement warning |
| One or more of the measurements of the device are of |
| questionable accuracy (Quality bad or out of range). | ||
|
|
| |
|
|
|
|
13 | Safety warning |
| A condition has been detected which may result in a |
| safety hazard. | ||
|
|
| |
|
|
|
|
14 | Reagent warning |
| Some action is required with the reagent system. |
|
|
|
|
15 | Maintenance required warning |
| Maintenance is required on this device. |
|
|
| |
| Table 16 Status | ||
|
|
|
|
Bit | Status 1 |
| Description |
|
|
|
|
0 | Calibration in progress |
| The device is in calibration mode. The measurements |
| may not be valid. | ||
|
|
| |
|
|
|
|
1 | Cleaning in progress |
| The device is in cleaning mode. The measurements may |
| not be valid. | ||
|
|
| |
2 | Service/Maintenance menu |
| The device is in service or maintenance mode. The |
| measurements may not be valid. | ||
|
|
| |
|
|
|
|
3 | Common error |
| Device recognized an error, see Table 15 for more |
| detailed information | ||
|
|
| |
|
|
|
|
4 | Measurement 0 Quality bad |
| Precision of measurement is out of specified limits. |
|
|
|
|
5 | Measurement low limit |
| Measurement is below specified range. |
|
|
|
|
6 | Measurement high limit |
| Measurement is above specified range. |
|
|
|
|
7 | Measurement 1Quality bad |
| Measurement is below specified range. |
|
|
|
|
8 | Measurement 1 low limit |
| Measurement is above specified range. |
|
|
|
|
9 | Measurement 1 high limit |
| Measurement is below specified range. |
|
|
|
|
10 | Measurement 2 Quality bad |
| Measurement is above specified range. |
|
|
|
|
11 | Measurement 2 low limit |
| Measurement is below specified range. |
|
|
|
|
12 | Measurement 2 high limit |
| Measurement is above specified range. |
|
|
|
|
13 | Measurement 3 Quality bad |
| Measurement is below specified range. |
|
|
|
|
14 | Measurement 3 low limit |
| Measurement is above specified range. |
|
|
|
|
15 | Measurement 3 high limit |
| Measurement is below specified range. |
|
|
|
|
65
