Installation
3.2.2 Vertical or horizontal pipe mounting
Refer to Figure 4 for mounting descriptions. For more information on pipe mounting refer to the instructions supplied with the mounting kit.
| Figure 4 | Pipe mounting hardware | ||
1 | Bracket, pipe mount (LZY001) |
| 3 | Flat washer (4x) (LZX948) |
|
|
|
|
|
2 | Rubber pads (8x) (LZX948) |
| 4 | Hexagon head screw (4x) M5 x 30 mm (LZX948) |
|
|
|
|
|
3.2.3 Panel Mounting
Refer to the instruction sheet supplied with the mounting hardware for installation instructions.
3.2.4 Sun-shield
The optional
3.3 Wiring safety information
DANGER
Electrocution hazard. Always disconnect power to the instrument when making electrical connections.
When making any wiring connections to the sc1000 Controller, the following warnings and notes must be adhered to, as well as any warnings and notes found throughout the individual installation sections. For more safety information refer to Safety information on page 9.
Remove the display module before performing any wiring tasks (Figure 5).
14