Hach sc1000 Alphanumeric keypad, Calibrate the touch screen, Specify the displayed language

Standard Operations

5.5 The alphanumeric keypad

The keypad pops up automatically if it is necessary to enter characters or numbers to a configuration setting.

This display is used to enter letters, numbers and symbols as needed when programming the instrument. Unavailable options are disabled (grayed out). The icons on the right and left of the screen are described in Figure 42.

The central keypad changes to reflect the chosen entry mode. Press a key repeatedly until the desired character appears on the screen. A space can be entered by using the underscore on the 0_? key.

Figure 42 Keypad

1	BACK arrow—Deletes the character previously entered	4	LEFT/RIGHT/UP/DOWN arrow—Moves the cursor
	in the new position.		position.
2	HOME button—Cancels the keypad input.	5	Keypad for entering regular numbers, characters,
			punctuation, symbols and numerical sub- and
3	ENTER button—Accepts the keypad input.
			superscripts

5.6 Calibrate the touch screen

During initial commissioning of the sc1000 controller, the touch screen calibration will be automatically displayed. To configure the touch screen, follow the calibration points on the screen. Make sure that the touch screen is calibrated to the appropriate device (finger, stylus, etc.) that will be used by all operators. If the device is changed, it will be necessary to recalibrate the screen.

To calibrate the touch screen after initial commissioning:

1.Select SYSTEM SETUP, DISPLAY SETTINGS, TOUCH SCREEN CALIBRATION.

2.Follow the calibration points. When calibration is complete the Display Settings menu is displayed.

5.7Specify the displayed language

To specify the displayed language:

1.Select SYSTEM SETUP, DISPLAY SETTINGS, LANGUAGE.

2.Use the ENTER button or press the selected language to enter the list box.

3.From the list box, select the language to display on the screen and select the ENTER button to confirm the selection or select the CANCEL button.

59