Advanced Operations
6.3.3.11 Function set to SYSTEM ERROR working mode
SYSTEM ERROR
|
| Default value: DISABLED |
| WARNING LIST | ENABLED: Monitors the internal warning bits of every probe. |
|
| DISABLED: Monitoring is disabled. |
|
|
|
|
| Default value: DISABLED |
| ERROR LIST | ENABLED: Monitors the internal error bits of every probe. |
|
| DISABLED: Monitoring is disabled. |
|
|
|
|
| Default value: DISABLED |
| SENSOR MISSING | Monitors the connection of every connected probe. |
| ENABLED: Monitoring is active. | |
|
| |
|
| DISABLED: Monitoring is not active. |
|
|
|
| ON DELAY | Default value: 5 seconds |
| (0 | Sets a delay for the relay to turn on. |
|
|
|
| OFF DELAY | Default value: 5 seconds |
| (0 | Sets a delay for the relay to turn off. |
|
|
|
|
| Default value: OFF |
| LOG INTERVAL | Sets the interval for logging the displayed value into the data logger. |
|
| Options: OFF, 5 min, 10 min, 15 min, 20 min, 30 min. |
|
|
|
