Table of Contents
5.2 | The measured value display | 55 | |
5.2.1 | Daily and weekly trend lines | 56 | |
5.2.2 | Configure the measured value display | 56 | |
5.3 | The Graph display | 56 | |
5.4 | The Main menu display | 58 | |
5.5 | The alphanumeric keypad | 59 | |
5.6 | Calibrate the touch screen | 59 | |
5.7 | Specify the displayed language | 59 | |
5.8 | Set the time and date | 60 | |
5.9 | Set up system security (passcode protection) | 60 | |
5.9.1 | Set the passcode | 60 | |
5.10 Add and remove favorites | 61 | ||
5.11 Add new components | 61 | ||
5.12 | Configure the network modules (Profibus/Modbus cards) | 62 | |
5.12.1 | Configure the Profibus/Modbus card | 62 | |
5.12.2 | Error and status register | 64 | |
5.12.3 | Profibus/Modbus configuration example | 66 | |
5.13 Remote control | 67 | ||
5.13.1 Prepare the LAN connection | 67 | ||
5.13.2 Set up the LAN connection | 67 | ||
5.13.3 | Set up the | 68 | |
5.13.4 | Access the sc1000 controller through a web browser | 70 | |
5.14 Log data | 71 | ||
5.14.1 | Save log files to the storage card | 71 | |
5.14.2 | Save log files through browser access | 71 | |
5.14.3 | Remove log files through browser access | 72 | |
5.15 | Formula editor for output and relay card | 73 | |
5.15.1 Add a formula | 73 | ||
5.15.2 Add a formula with measurement values from other probes | 74 | ||
5.15.3 | Formula operations | 74 | |
Section 6 Advanced Operations | 77 |
6.1 Sensor status menu | 77 |
6.2 Sensor setup menu | 77 |
6.3 System setup menu | 78 |
6.3.1 Output setup menu | 78 |
6.3.2 Current inputs menu | 83 |
6.3.3 Relay menu | 87 |
6.3.3.1 General relay settings (available in all relay working modes) | 87 |
6.3.3.2 Function set to ALARM working mode | 88 |
6.3.3.3 Function set to FEEDER CONTROL working mode | 90 |
6.3.3.4 Function set to 2 POINT CONTROL working mode | 93 |
6.3.3.5 Function set to WARNING working mode | 97 |
6.3.3.6 Function set to PWM CONTROL/LINEAR working mode | 99 |
6.3.3.7 Function set to PWM CONTROL/PID CONTROL working mode | 102 |
6.3.3.8 Function set to FREQ. Control / Linear working mode | 103 |
6.3.3.9 Function set to FREQ. Control/PID CONTROL mode | 105 |
6.3.3.10 Function set to TIMER working mode | 106 |
6.3.3.11 Function set to SYSTEM ERROR working mode | 108 |
6.3.4 Network Modules (Profibus, Modbus) | 109 |
6.3.4.1 Profibus | 109 |
6.3.4.2 Modbus | 111 |
6.3.5 GSM module | 113 |
6.3.6 Device management | 115 |
2
