Hach sc1000 user manual Advanced Operations GSM module, 113

Advanced Operations

6.3.5 GSM module

The GSM Module menu contains all settings which are needed for remote communication (dial-up) between the sc1000 controller and a computer.

For more detailed information refer to section 3.10 on page 45.

			Note: This menu is displayed only if a GSM modem is installed in the sc1000 controller
SYSTEM SETUP
GSM MODULE
	PROVIDER			Displays the current mobile network.
	SIGNAL STRENGTH			Displays the radio signal strength (0%–100%)
	STATUS			Displays the current status of the GSM modem:
		INITIALIZATION		The display module initializes the GSM modem
		NO SIM CARD		Refer to section 3.10.3 on page 47 on how to insert a SIM card.
		WRONG PIN		The configured PIN number is not correct.
		SEARCHING		The GSM modem tries to connect to the SIM card (mobile network).
		NETWORK
		INCOMMING CALL		The GSM modem detects an incoming call.
		CONNECTION		The GSM modem accepts the call and is online.
		READY		The GSM modem is ready for operation.
	EXTERNAL DIAL-UP
		ALLOWED		Remote access via GSM modem is allowed.
		DENIED		The GSM modem doesn't answer incoming calls. SMS shipping is always possible!
	EXTERNAL SERVICE
	DIAL-UP
		ALLOWED		Dial-in for service technicians is allowed.
		DENIED		Dial-in for service technicians is not allowed. Login is possible with customer password only.
				Refer to section 6.3.8 on page 116.
				Displays the IP address of the display module. To access the display module via your web
	IP SERVER			browser, enter this IP address into the web browser address field. The default IP address
				192.168.154.30 is always valid for remote access.
	IP CLIENT			Displays the IP address of the remote computer.
	SMS DESTINATION
		NUMBER SERVICE		Contains the same functionality like SMS DESTINATION 1-4, but it is password protected with
				the MAINTANENCE password.
		SMS DESTINATION 1-4
			SMS DESTINATION	SMS receptors telephone number.
				Selects a language for SMS text.
			LANGUAGE	Note: The character set for SMS text is limited to the GSM alphabet. Some languages contain
				not supported characters. Not supported characters are replaced with a '?'.
			SMS LIMIT	Sets the maximum number of SMS messages the display module is allowed to send out within
			(0–100)	24 hours for this SMS DESTINATION. The 24h cycle starts at the at the set START TIME.
			REPEAT	Sets an interval for the repeat cycle.
				The interval determines the frequency of sending not confirmed messages to the SMS
			(0–24 hours)
				destination.
				Sets the start time for the REPEAT cycle.
			START TIME	(Example: REPEAT=6 hours, START TIME=2:00: Not confirmed messages are sent at 2:00,
				8:00, 14:00, 20:00).

113