Hach sc1000 user manual Standard Operations, Tips for the use of the touch screen, Display modes

Standard Operations

Figure 38 Attach the display module to the probe module

5.1.2 Tips for the use of the touch screen

The entire screen of the display module is touch-activated. To make a selection, press the screen with a fingernail, fingertip, pencil eraser or a stylus. Do not press the screen with a sharp object, such as the tip of a ball point pen.

•Do not place anything on top of the screen, to prevent damage or scratching on the screen.

•Press buttons, words or icons to select them.

•Use scroll bars to move up and down long lists very quickly. Press and hold the scroll bar, then move up or down to move through the list.

•Highlight an item from a list by pressing it once. When the item has been successfully selected, it will be displayed as reversed text (light text on a dark background).

5.1.3The display modes

The display module offers different display modes and a pop-up toolbar:

•Measured value display: Default display when a probe is connected and the sc1000 controller is in measurement mode. The sc1000 controller automatically identifies the connected probes and displays associated measurements.

•Graph display: Option in the measured value display. Displays measured values as graphs. The Graph display is accessed through the pop-up toolbar.

•Main menu display: Software interface for setting up parameters and settings of a device, probe and display module. The Main menu is accessed through the pop-up toolbar.

•Pop-up toolbar: The pop-up toolbar provides access to the sc1000 controller and probe settings and is normally hidden from view. To view the toolbar, touch the bottom-left of the screen. The toolbar contains the buttons described in Figure 39.

54