
Advanced Operations
6.3.3.5 Function set to WARNING working mode
WARNING
|
| Default value: Disabled |
| WARNING LIST | Sets the monitoring of the internal warning bits of the selected source. |
| ENABLED: Monitoring is active. | |
|
| |
|
| DISABLED: Monitoring is not active. |
|
|
|
|
| Default value: Disabled |
| ERROR LIST | Sets the monitoring of the internal error bits of the selected source. |
| ENABLED: Monitoring is active. | |
|
| |
|
| DISABLED: Monitoring is not active. |
|
|
|
|
| Default value: Disabled |
| PROCESS EVENT | Sets the monitoring of the internal process event bits of the selected source. |
| ENABLED: Monitoring is active. | |
|
| |
|
| DISABLED: Monitoring is not active. |
|
|
|
|
| Default value: |
| SET TRANSFER | Sets the status of the relay |
| warning, error or process event bits) are detected in the selected source or if the source is | |
|
| |
|
| missing. |
|
|
|
| ON DELAY | Default value: 5 seconds |
| (0 | Sets a delay time for the relay to turn on. |
|
|
|
| OFF DELAY | Default value: 5 seconds |
| (0 | Sets a delay time for the relay to turn off. |
|
|
|
97