![](/images/new-backgrounds/1192690/1926905x1.webp)
Table of Contents
Section 1 Specifications | 5 | ||
Section 2 General Information | 9 | ||
2.1 | Safety information | 9 | |
2.1.1 | Use of hazard information | 9 | |
2.1.2 | Precautionary labels | 10 | |
2.2 | General product information | 10 | |
2.3 | Controller storage | 10 | |
Section 3 Installation | 11 | ||
3.1 | Mechanical installation | 11 | |
3.1.1 | Controller dimensions | 12 | |
3.2 | Mounting the controller | 13 | |
3.2.1 | Wall mounting | 13 | |
3.2.2 | Vertical or horizontal pipe mounting | 14 | |
3.2.3 | Panel Mounting | 14 | |
3.2.4 | 14 | ||
3.3 | Wiring safety information | 14 | |
3.3.1 | Electrostatic discharge (ESD) considerations | 15 | |
3.4 | Electrical installation | 16 | |
3.4.1 | Installation in | 16 | |
3.4.2 | Installation using a power cord | 17 | |
3.4.3 | Wiring for AC power at the controller | 20 | |
3.4.4 | Wiring for 24 VDC power at the controller | 24 | |
3.5 | DIN rail expansion modules | 26 | |
3.6 | Expansion cards | 27 | |
3.6.1 | Relay card connections | 28 | |
3.6.2 | Input card connections | 31 | |
3.6.3 | Output card connections | 33 | |
3.6.4 | Modbus card connections | 34 | |
3.6.5 | Profibus DP card connections | 35 | |
3.6.6 Remove/Replace an expansion card | 37 | ||
3.7 | Install an sc1000 network (sc1000 bus connection) | 37 | |
3.7.1 | sc1000 network connections | 38 | |
3.8 | Connect probes to the sc1000 controller | 43 | |
3.8.1 | Connect the probe data cable | 43 | |
3.8.2 | Add probe connections | 44 | |
3.8.3 Connect AC powered sc probes | 44 | ||
3.9 | Service port connection (LAN connection) | 44 | |
3.10 GSM modem connection | 45 | ||
3.10.1 | Safety precautions | 45 | |
3.10.2 | SIM card requirements | 46 | |
3.10.3 | Insert the SIM card into the display module | 47 | |
3.10.4 | Connect the external GSM antenna to the display module | 48 | |
3.11 | Storage card (SD card) | 49 | |
3.11.1 | Insert the storage card into the display module | 49 | |
3.11.2 | Prepare the storage card | 50 | |
Section 4 System Start Up | 51 | ||
Section 5 Standard Operations | 53 | ||
5.1 | The display module | 53 | |
5.1.1 | Attach the display module to the probe module | 53 | |
5.1.2 | Tips for the use of the touch screen | 54 | |
5.1.3 | The display modes | 54 |
1