Hach sc1000 Attach the external output module, External Output Module Terminal Assignments, 145

A.5 Attach the external output module

The output module provides two outputs, 0–20 mA/4–20 mA, 500 Ohm.

1.Remove power and disconnect all cable connections to the module.

2.Place the External Output Module on the DIN rail to the right of the base module and slide firmly against the base module (or other connected modules).

3.Make the appropriate connections as shown in Figure 78 and Table 51.

4.Connect cables to the module and reconnect power from the instrument.

Figure 78 External output module

Table 51 External Output Module Terminal Assignments

Terminal	Assignment	Description
1–4	Not used	—
5	–
6	Shield	Analog output 1 max. 500 Ohm
7	+
8	Not used	—
9	–
10	+	Analog output 2 max 500 Ohm
11	Shield
12–16	Not used	—

145