Furman Sound Elite-16 PF E manual Soft Start Continuous Use and Break-In Time

Page 6

Elite-16 PF E Manual

continuous current draw may be limited to a range between 2900 - 3500 Watts per Elite-16 PF E employed.

The RMS current available before the circuit breaker trips varies due to what is referred to as a vector load. Simply put, the type of power supplies or electronic circuits connected to the Elite-16 PF E will have an effect on its circuit breakers perceived current load, and therefore, when it will trip. Though the benefits of power factor correction far outweigh the small reduction in continuous current draw, this must be accounted for when constructing a large system with high current demands.

The total continuous current draw of most electronic components is typically listed in Watts by their AC input cord or AC connector. Watt ratings are simply added to determine the total system RMS current draw. It should also be noted that the Elite-16 PF E’s power correction circuitry has no actual effect on the power drawn from your utilities’ power meter. The Elite-16 PF E draws a mere 8 Watts independent of other components, so it may be left on at all times.

Soft Start - Continuous Use and Break-In Time

When power is first applied to the Elite-16 PF E, (the front panel breaker- power toggle must be switched to the “on” position) the Soft Start feature is activated. There is an audible “clack” when the Elite-16 PF E is first turned on or off. This sound is produced by the Soft Start circuit’s 30 Amp relay engaging or disengaging. There is virtually nothing in the Elite-16 PF E’s construction, design, or componentry to wear over the life time of the product, and there is no power draw from your electric service meter aside from the LED power indicator and relay circuits. For this reason the Elite-16 PF E may

- -

be left with its power engaged permanently. This is an added benefit, as many audio/videophiles find performance improves significantly when leaving low-powered components permanently charged (turned on). In fact, this is true of the Elite-16 PF E. Though it will function flawlessly right from its shipping carton, the performance of its circuit parts will improve after approximately two weeks of continuous use or “break-in.”

Front Panel LEDs

Extreme Voltage Shutdown Indicator:

This LED is normally off. It monitors AC wiring faults – for example, accidental connection to an open neutral (in some countries) could put well over 300 VAC RMS onto the mains outlet. The Series Multi-stage Protection (SMP) circuit senses voltages that are so high that operation would be impossible and shuts the power down before damage can occur. Upon initially applying power to these units, the Extreme Voltage indicator LED will light if the input voltage is above the extreme voltage cutoff, and power will not be applied to the unit’s outlets. If the unit has been operating with an acceptable input voltage and subsequently that voltage exceeds 270 VAC, it will shut off power to the outlet and the Extreme Voltage LED will light.

Protection OK Indicator:

Although the Furman SMP circuit assures virtually maintenance free protection from transient voltage spikes and surges, nature has a way of occasionally creating electrical forces that are beyond the capabilities of any Transient Voltage Surge Suppression device to absorb without some degree of damage. In the rare instance that this occurs, the blue LED located in the center of the front panel will dim, even though AC power is present at the unit’s outputs.

Image 6
Contents Page Elite-16 PF E Manual Introduction Installation Connection Soft Start Continuous Use and Break-In Time Satellite Cable Transient Voltage Surge Suppressors Warranty Elite-16 PF E Manual ELITE-16 PF E Specifications Page Furman Sound, LLC

Elite-16 PF E specifications

The Furman Sound Elite-16 PF E is a high-performance power management and conditioning tool designed to protect sensitive audio and video equipment while enhancing overall performance. This device is particularly popular among audio professionals, live sound engineers, and AV enthusiasts who demand reliability and versatility in their setups.

One of the key features of the Elite-16 PF E is its advanced power conditioning capabilities. It employs Furman's Linear Filtering Technology (LiFT) to minimize noise and interference. This ensures that connected equipment receives clean power, which is critical for achieving optimal sound quality. By reducing electromagnetic interference (EMI) and radio frequency interference (RFI), the Elite-16 PF E helps to deliver clear, undistorted audio free from unwanted hum and buzz.

Another standout characteristic is its advanced surge protection. The device incorporates Furman's Blue Twist lock connectors and its exclusive SMP (Surge Multi-Stage Protection) technology, which not only isolates and protects connected devices from power surges but also maintains the integrity of audio signals. This protection is vital in environments where voltage spikes can occur, preventing damage to expensive gear.

The Elite-16 PF E also features a comprehensive matrix of 16 outlets, allowing users to connect multiple devices without worrying about power distribution. The outlets are arranged in a convenient manner, facilitating easy access for all connected equipment. This is complemented by a built-in 15A circuit breaker, which safeguards the system by preventing overload situations.

Additionally, the unit boasts a digital voltmeter and ammeter, providing real-time monitoring of voltage and current. This insight into power usage helps users gauge the overall efficiency of their equipment and detect any irregularities in power flow.

In terms of build quality, the Elite-16 PF E is constructed with durability in mind. The rugged design and robust chassis are capable of withstanding the rigors of mobile applications while remaining visually appealing in a fixed installation.

Features such as 2 direct output switches, a pull-out LED light, and a front panel that includes a voltage meter make the Furman Sound Elite-16 PF E versatile and user-friendly. The unit is perfect for those seeking a sophisticated solution to power management, ultimately enhancing the longevity and performance of audio and video systems.