Connection

Elite-16 PF E Manual

E does not produce any appreciable heat under standard use. The Elite-16 PF E may also be rack mounted in a standard 19” (48.26 cm) rack by attaching the Elite-16 PF E rack ears. These rack ears (contained within the plastic rack kit package) mount flush with the back portion of the Elite-16 PF E’s front panel. They are attached to the chassis by installing each rack ear with (3) pan-head Philips screws contained within the Elite-16 PF E rack mounting kit. The third screw used for each rack ear is for the center hole, located towards the rear and aids in stabilizing the unit when rack mounted.

AC Cable Routing

Once the Elite-16 PF E is placed, its AC cord’s female end must be plugged into the male IEC connector located on the lower left hand side of the rear panel (when facing the rear panel). Next the male plug must be connected to an appropriate socket (see current rating recommendation above).

Connecting Components to the Linearly

Filtered Video Component AC Outlet Banks

The Elite-16 PF E’s four “Linearly Filtered Video AC Outlets” should be employed for critical video and or digital components such as DVD players, projectors, plasma, or LCD screens. When employing the Elite-16 PF E for a 2- channel audio system, an SACD player would be ideally suited for one of these outlets.

Connecting Components to the Linear Filtered Audio Component AC Outlet Banks

The Elite-16 PF E’s four “Linear FilteredAudioAC Outlets” should be employed for any component not connected to the “Linearly Filtered Video AC Outlets,” with the exception of receivers,

power amplifiers and powered sub-woofers. These outlets possess the same exceptional AC noise filtering and isolation to maximize system performance.

Connecting Components to the High Current Power Amplifier Banks

All power amplifiers, receivers and powered sub-woofers should be connected to these four outlets.

Many Audiophile and premium Home Theater systems will have combined continuous current demands well below 16 Amps. It is rare, in fact, for large power amplifiers to draw more than 3 Amps continuously. For superior performance, it is vital that an AC filter possess extraordinarily low impedance, and have the capability to pass peak current demands far in excess of the RMS (continuous) current rating.

The Elite-16 PF E was designed to more than meet this demand. Additionally, our Power Correction Circuitry effectively creates a current reserve in excess of 45 amps peak charge that is cleaner and far more efficient when supplying needed current to your power amplifier than a dedicated line from your local power station. This feature eliminates any concern towards the current compression that can result from typical power conditioners, and the peak power reservoir benefits any power amplifiers performance dramatically.

Note about Power Factor Correction and Current Consumption

When power correction technology is employed with even the most sophisticated circuit breakers, it effectively adds to the perceived current load. Though the Elite-16 PF E was designed for steady 16 Amp operation, and peak current demands many times that, the maximum total

- -

Elite-16 PF E specifications

The Furman Sound Elite-16 PF E is a high-performance power management and conditioning tool designed to protect sensitive audio and video equipment while enhancing overall performance. This device is particularly popular among audio professionals, live sound engineers, and AV enthusiasts who demand reliability and versatility in their setups.

One of the key features of the Elite-16 PF E is its advanced power conditioning capabilities. It employs Furman's Linear Filtering Technology (LiFT) to minimize noise and interference. This ensures that connected equipment receives clean power, which is critical for achieving optimal sound quality. By reducing electromagnetic interference (EMI) and radio frequency interference (RFI), the Elite-16 PF E helps to deliver clear, undistorted audio free from unwanted hum and buzz.

Another standout characteristic is its advanced surge protection. The device incorporates Furman's Blue Twist lock connectors and its exclusive SMP (Surge Multi-Stage Protection) technology, which not only isolates and protects connected devices from power surges but also maintains the integrity of audio signals. This protection is vital in environments where voltage spikes can occur, preventing damage to expensive gear.

The Elite-16 PF E also features a comprehensive matrix of 16 outlets, allowing users to connect multiple devices without worrying about power distribution. The outlets are arranged in a convenient manner, facilitating easy access for all connected equipment. This is complemented by a built-in 15A circuit breaker, which safeguards the system by preventing overload situations.

Additionally, the unit boasts a digital voltmeter and ammeter, providing real-time monitoring of voltage and current. This insight into power usage helps users gauge the overall efficiency of their equipment and detect any irregularities in power flow.

In terms of build quality, the Elite-16 PF E is constructed with durability in mind. The rugged design and robust chassis are capable of withstanding the rigors of mobile applications while remaining visually appealing in a fixed installation.

Features such as 2 direct output switches, a pull-out LED light, and a front panel that includes a voltage meter make the Furman Sound Elite-16 PF E versatile and user-friendly. The unit is perfect for those seeking a sophisticated solution to power management, ultimately enhancing the longevity and performance of audio and video systems.