page 14
COMMERCIAL PRODUCTS DIVISION
Attach the upper portion
of the handrails to the
handrail clamp.
Diagram 6
8. Attach the upper portion of the handrails to the handrail clamp (removed in
step 5). Position the handrails as shown in Diagram 6, #1. Slide the handrails
into the clamp.
9. Rotate the handrail clamp so that it aligns with the mounting holes on the
upper column. Diagram 6, #2.
10. Secure the handrails to the handrail clamp. Insert two screws (H) with split
lock washers (B) through the handrail clamp. Tighten the screws using the
appropriate hex key. Diagram 6, #3.

Do not attach the clamp to the upper

column at this point.

Diagram 7
Align the vertical handlebars
and handrail clamp and route
the heart rate cable.
11. Slide the vertical handlebar into position. Diagram 7. The handlebar bracket
is sandwiched between the upper column and the handrail clamp. Have your
assistant open about a two inch gap between the upper column and the
handrail clamp by pulling or pushing the handrails toward the foot plates.
Position the handlebar bracket between the upper column and handrail
clamp.
12. Thread the heart rate cable through the hole in the upper column. Diagram 7.
Secure handrails in
clamp.
Handrail
Foam grip
Rotate handrail clamp.
2 31
Handrail clamp
Vertical handlebar
Handrail
Handlebar bracket
Heart rate cable
Upper column
Handrail clamp