C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 9 Attach the display console.
Cables found in back of the display console.
1
Route the ribbon cable through the upper column.
Connect the heart rate cable.
3
2
16.Attach the display console by taking the following steps:
a.Gently unwrap the cables found in the back of the display console. Diagram 9, #1.
b.Hold the display console above the upper column and route the ribbon cable down through the column and out its base. Diagram 9, #2.
c.Carefully lower the display onto the upper column so that your assistant can connect the heart rate cables. Diagram 9, #3. Gently place any excess cable into the opening on the back of the display console.
Important: Be sure not to crimp or pinch the cables. Damaged cables are not covered by the Precor Limited Warranty.
page 16
