C O M M E R C I A L P R O D U C T S D I V I S I O N

Diagram 11 Connect the ribbon cable

1

2

and complete the C764

assembly.

 

 

Pull ribbon cable through

 

 

upper column.

 

 

Tabs on receptacle

 

 

Connect the ribbon

 

 

cable.

 

 

Push excess cable into

3

4

 

 

upper column.

 

 

Lower the rubber boot over the base mounting plate.

17.Connect the ribbon cable. Return to the upper column where it is mounted to the base assembly and take the following steps:

a.Pull the ribbon cable out of the upper column. Diagram 11, #1.

b.Open the tabs on the ribbon cable receptacle. Plug the connector into the receptacle. Diagram 11, #2. Make sure that all pins are aligned and fully engaged. The connector is designed to engage in one direction only. Do not force the connector into the receptacle.

c.Gently push the excess ribbon cable and the connectors up into the column support. Diagram 11, #3.

18.Lower the rubber boot over the base mounting plate. Make sure that the boot seats correctly over the plastic casing. Diagram 11, #4.

You have completed the installation of the C764 vertical handlebars with the heart rate feature. To learn more about the heart rate feature continue reading.

page 18

Page 18
Image 18
Precor owner manual Complete the C764