Notebook User Guide
•Load Setup Defaults
Lets you load the default values for all setup items.
•Discard Changes
Reverts to previously selected settings.
•Save Changes
Saves Setup data to CMOS.
6.7How to Upgrade the BIOS
Your computer uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS program. When you update the BIOS, any customized settings you made are lost.
To upgrade the BIOS:
1.Put in the BIOS Update data into the USB device.
2.Power on the system with the USB device inserted in the USB port.
3.On the DOS prompt, type the following command.
A:\>Phlash XXXXXX.ROM (BIOS filename) or
A:\>XXXXXX.BAT (Batch file for BIOS file)
Press <Enter> to run this BIOS utility. After the system has been successfully run this program, a message similar to the following appears:
Flash memory has been successfully programmed, press any key to restart the system. If the system does not restart, turn it off, then turn on again.
4.Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
88