EVGA 121-LF-E652 PCI/PNP Resource Management, Clear Nvram, Plug & Play O/S, PCI Latency Timer

PCI/PNP Resource Management

Select PCI/PNP Resource Management from the CMOS Setup Utility menu and press Enter to display the advanced settings.

Advanced PCI/PnP Settings

______________________________________________

WARNING: Setting wrong values in below sections may cause system to malfunction.

Clear NVRAM	[No]
Plug & Play O/S	[No]
PCI Latency Timer	[64]
Allocate IRQ to PCI VGA	[Yes]
Palette Snooping	[Disabled]
PCI IDE BusMaster	[Enabled]
OffBoard PCI/ISA IDE Card	[Auto]
IRQ3	[Available]
IRQ4	[Available]
IRQ5	[Available]
IRQ7	[Available]
IRQ9	[Available]
IRQ10	[Available]

Help Item

Clear NVRAM during System Boot.

:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

Figure 6. PCI/PNP Resource Management

Clear NVRAM

This function clears the NVRAM during System Boot.

Plug & Play O/S

This function sets whether the O/S or BIOS configures Plug and Play devices. A setting of [No] is default.

PCI Latency Timer

This function sets the value in units of PCI clocks.