EVGA manual Appendix A. Post Codes for the Evga P55 FTW Motherboard, AMI Post Code

Appendix A. POST Codes for the EVGA P55 FTW Motherboard

This section provides the AMI POST Codes (Table 6) for the EVGA P55 FTW Motherboard during system boot up.

The POST Codes are displayed on the Debug LED readout located directly onboard the motherboard.

This Debug LED will also display current CPU temperatures after the system has fully booted into the Operating System.

Debug LED with CPU Temperature Monitor

Table 6.		AMI POST Code
	Code	Description
	03	Initialize BIOS.
	04	Check Battery Power and CMOS
	05	Initialize interrupt controlling hardware/vector table
	06	Initialize system timer
	07	Fixes CPU POST interface calling pointer
	08	Primary initialization of CPU
	C0	Secondary initialization of CPU
	C1	Set up boot strap processor information
	C2	Set up boot strap processor for POST
	C5	Enumerate and set up application processors
	C6	Re-enable cache for boot strap processor
	C7	Early CPU initialization exit
	0A	Initialize keyboard controller
	0B	Detect Mouse
	0C	Detect Keyboard
	0E	Test input devices
	13	Early POST initialization of chipset registers