EVGA FTW3 Motherboard
1 - I/O Shield
Installs in the system case to block radio frequency transmissions, protect internal components from dust, foreign objects, and aids in proper airflow within the chassis.
3-
Allows a Molex power connector to adapt to a SATA power connector.
1 - IEEE1394a (Firewire) Bracket
Provides one (1) additional IEEE1394a port to the back panel of the chassis.
1-
Provides four additional USB ports to either the front or back panels of the chassis.
6 - SATA Data Cables
Used to support the SATA protocol and each one connects a single drive to the motherboard.
1 - IDE Data Cable
Passes data between the IDE connection on the motherboard and IDE device.
1-
Bridges two (2) graphic cards together which allows for
1-
Bridges three (3) graphic cards together which allows for
1 - Installation CD
Contains drivers and software needed to setup the motherboard.
13