EVGA X58 FTW3, 132-GT-E768 Reset Configuration Data, Resources Controlled By, IRQ Resources

EVGA X58 FTW3 Motherboard

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has caused a serious conflict that prevents the OS from booting. The default setting is [Disabled].

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the BIOS can automatically configure all the boot and plug-and-play compatible devices or if you can manually select IRQ, DMA, and memory base address fields. Select [Auto(ESCD)] if you want the BIOS to automatically populate these fields. If you select [Manual] so you can assign the resources, IRQ Resources is enabled for input.

Resources		Controlled By		[Auto(ESCD)]
x IRQ	Resources			Press	Enter
Resources		Controlled By		[Manual)]
IRQ	Resources		[Press		Enter]

IRQ Resources

To enable this field for input, set Resources Controlled By to [Manual]. With this field enabled, press Enter to see options.

IRQ-5	assigned to	[PCI Device]
IRQ-9	assigned to	[Reserved]
IRQ-10 assigned to		[PCI Device]
IRQ-11 assigned to		[PCI Device]
IRQ-12 assigned to		[PCI Device]
IRQ-14	assigned to	[PCI Device]
IRQ-15	assigned to	[PCI Device]

54