The PD11SS is a sequential four step/stage power up/down conditioned power distribution unit. It is designed to protect electronic equipment that requires a
1 thru 4 steps/stages in sequential power up/ | 15 amp breaker |
down 1, 5, 10, 30 second |
|
Breaker protected and unswitched
15 amp outlet
|
| Power switch | |
Sequential | |||
On / Off | |||
On / Off | |||
| |||
Stage 1 | Stage 2 | Stage 3 | Stage 4 |
Protection "On"
Indicator
3 pin terminal block for remote sequential operation of unit
Protected
"Always On” Outlets
PD11SS Features:
•Microprocessor monitored sequential power distribution system
•Four power up/down steps or stages of distributed and conditioned power
•Four
•Optional manual settings for up to 240 seconds between intervals
•One dual 15 amp
•One dual 15 amp "always on"
•Full 15 amps, 1800 watts capacity per unit
•
•Protected "always on" 15 amp AC power outlet on the front panel
•Total unit 15 amp outlet circuit breakers located on front panel
•
•EMI/RFI filtration
•Watch dog circuitry with "Go/No Go" L.E.D. display
•One rack space high
•One year limited warranty
Other Features:
•Remote control operation
Access to remote feature is internal to three PC board mounted screw terminals for
Specifications:
Dimensions | 19" L x 10" D x 1 3/4" H |
Weight | 10 lbs. |
Quality Finish | Black powder coated chassis, black anodized aluminum front panel |
Electrical | 120V, 50/60 Hz, single phase |
Max. amps | 15/unit |
Max. watts | 1800/unit |
Max. front outlet | 15 amps |
Spike/surge protection | Line to neutral, neutral to ground, line to ground |
Clamping level | 200V peak |
Response time | 1 nanosecond |
Max. surge voltage | 6000V |
Max. surge current | 12,000 amps |
Max. spike energy | 450 joules total |
Noise attenuation | Transverse > 35 dB, 1.5 kHz to 200 MHz |
Certification | ETL listed |