| SPECIFIC FEATURES FOR MODELS: | |||||||
FEATURE |
|
|
|
|
|
|
|
|
LIGHT SWITCH |
| |||||||
LIGHT TUBES | ||||||||
VOLTAGE DISPLAY |
|
| ||||||
CIRCUIT BREAKER |
| |||||||
POWER SWITCH | ||||||||
(1) FRONT PANEL |
| |||||||
IEC320 OUTLET |
|
|
|
|
|
|
|
|
(1) BACK PANEL | ||||||||
IEC320 MALE INLET |
|
|
|
|
|
|
|
|
(10) BACK PANEL | ||||||||
SWITCHED |
|
|
|
|
|
|
|
|
General Operating Instructions:
1.Install unit in a standard
2.Connect Power Distribution/Lights Only unit to 230VAC 50/60Hz power source.
3.Plug sensitive electronic equipment into conditioned outlets on back of unit.
4.Move the power switch (#5) to the "ON" position to provide power and protection to the electrical equipment.
5.For illumination (Models
IMPORTANT: Be sure the light switch (#1) is in the "OFF" position when the light tubes are recessed back inside the unit.
6.The digital voltmeter readout (#3) automatically and continuously displays the incoming voltage to the unit (Models
SERVICING:
WARNING: Hazardous voltages are present within the unit. Never attempt any maintenance without disconnecting the power cord.
ATTENTION: Les tensions de l'appareil présentent des dangers. Déconnectez le cordon d'alimentation avant d'effectuer toute réparation.
VERWARNEND: Gefährlich stromspannung bist im einheit. Test nicht versuch erhaltung ohne ent- fernend das gewalt schnur.
AMMONIMENTO: Pericolosa voltaggio siamo presentano negli unità. Do non tentative mantenimento senza allontanando gli potenza spago.