EVGA 122-YW-E173 manual IDE Function Setup

IDE Function Setup

Press Enter to display the IDE Function Setup menu.

OnChip IDE Channel0

Primary Master		PIO
Primary Slave		PIO
Primary Master		UDMA
Primary	Slave	UDMA
IDE DMA	transfer	access

Serial-ATA Controller

IDE Prefetch Mode

‰OnChip IDE Channel0 Use this function to enable or disable the onchip IDE Channel0. When disabled, the Primary Master/Slave functions are changed to Auto and cannot be changed.

[Enabled]

[Auto]

[Auto]

[Auto]

[Auto]

[Enabled] [All Enabled] [Enabled]

	OnChip IDE Channel0		[Disabled]
x	Primary Master	PIO	Auto
x	Primary Slave	PIO	Auto
x	Primary Master	UDMA	Auto
x	Primary Slave	UDMA	Auto
	IDE DMA transfer access		[Enabled]
	Serial-ATA Controller		[All Enabled]
	IDE Prefetch Mode		[Enabled]

‰Primary Master/Slave PIO

When OnChip IDE Channel0 is set to [Enabled], you can select a mode for the primary Master and Slave PIO. Select from Auto, or Mode 1 through

Mode 4.

‰Primary Master/Slave UDMA

When OnChip IDE Channel0 is set to [Enabled], you can disable the primary Master and Slave UDMA or set it to [Auto].

‰IDE DMA transfer access

Use this function to enable or disable IDE DMA transfer access.

‰Serial-ATA Controller

This function allows you to enable specific SATA controllers, enable all controllers, or disable all controllers. The options available are [SATA-0],

[SATA-0+1],[Enable All], and [Disabled].

‰IDE Prefetch Mode

Use this function to enable or disable the IDE Prefetch mode.

EVGA 40