Frequency/Voltage Control
Select Frequency/Voltage Control from the CMOS Setup Utility menu. Press Enter to display the functions of the Frequency/Voltage Control menu.
Phoenix – AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
` | System Clocks | [Press Enter] | Item Help | ||
` FSB & Memory Config | [Press Enter] |
|
| ||
` | System Voltages | [Press Enter] | Main Level | ` | |
| CPU | Clock Ratio Unlock | [Disabled] | ||
x CPU | Clock Ratio | 9 X |
|
| |
| LDT | Frequency | [5x] |
|
|
| Load timing/voltage set | [Press Enter] |
|
| |
| Save timing/voltage set | [Press Enter] |
|
| |
:Move Enter:Select
F5: Previous Values | F6: | F7:Defaults |
Figure 13. Frequency/Voltage Control
CPU Clock Ratio Unlock
This value is set by the CPU Multiplier when [Disable]. If set
to[Enabled], the option to manually set the CPU Multiplier can be selectable.
LDT Frequency
This option can be changed from 5x to 1x.
CPU N/2 Ratio
This option will only appear if a 45nm CPU is in use. This option, if [Enabled] will add a .5 to the multiplier. Ex: 9.5x