Once the Voltage is applied, OK! Message pops up. As you return to this menu from henceforth, VPLL will show the current VPLL, which is 1.27v. The voltages are retained even with a reboot, until the next power down.
To save profiles and load them easily and quickly, press the Hotkey of your choice 1,2,3 or 4.
You will see this:
Press Save to save all the current settings of all devices plugged into your EVBot, up to one Motherboard and 3 Video Cards.
To bring forth a previously saved profile, press the hotkey you saved the profile in, and choose Load instead of Save. With 4 Hotkeys, you can save and load up to 4 different profiles.
*Make sure you use the firmware that is for your VGA/Motherboard, check the
included CD for Firmware or from EVGA’s Website*
Now that you have learned the vital information for this exclusive product, you are now ready for extreme gaming and overclocking!