Exabyte 007-3086-001 Installing Into a Horizontal Drive Bay, Installing Into a Vertical Drive Bay

Page 19

Installing the Tape Drive

Follow these instructions to install a half-height front-loading device:

Installing Into a Horizontal Drive Bay

Follow these instructions to install the drive into a horizontal drive bay.

1.Orient the FLD and sled assembly so that the connectors on the back are on the bottom half of the drive and face away from you (see Figure 1-4).

2.Carefully insert the device into the drive bay until it seats firmly into the lever catch and the locking lever has moved all the way to the right.

Installing Into a Vertical Drive Bay

Follow these instructions to install the drive (sideways) into a vertical drive bay.

1.Orient the FLD relative to the drive bay so that the drive is facing toward the right (see Figure 1-5).

2.Select a vacant drive bay and carefully align the rails on the drive sled with the corresponding rails in the drive bay.

3.Slide the FLD into the bay until the locking mechanism is engaged and the locking lever on the drive sled moves down to the locked position. Push the lever down to ensure that it is fully engaged.

9

Image 19
Contents 8505XL 8-mm Tape Drive Owner’s Guide Contributors Contents Troubleshooting List of Figures Page List of Tables Viii About This Guide Typographical Conventions Products that Support the 8505XL InstallationEnsuring ESD Protection Preparing for InstallationUnpacking the Tape Drive and Saving the Materials Installing the Tape DriveChecking the Tape Drive Accessories Setting the Scsi IDFollow these steps to change the Scsi ID of the 8505XL 1Removing/Installing the Drive From/On the Drive Sled 2Setting the Scsi ID Default Setting Shown Configuring the Drive Sled for Single-Ended Operation Terminating the Scsi Bus Installing the Tape DriveInstalling Into a Vertical Drive Bay Installing Into a Horizontal Drive Bay4Installing the Tape Drive Into a Horizontal Drive Bay 5Installing the Tape Drive Into a Vertical Drive Bay Installing Your Driver Software Turning On Power to the Tape DriveTesting Your Installation REC Save 7Loading a Data Cartridge 1Problems and Possible Solutions Installation Reading the LEDs Operating the Tape Drive18505XL Front Panel LED States and Interpretations Selecting Data Cartridges Loading a Data Cartridge Write-Protecting a Data CartridgeUnloading a Data Cartridge Resetting the Tape DriveOperating the Tape Drive Recommended Cleaning Cartridges Preventive MaintenanceDetermining When to Clean the Tape Drive Using the Cleaning Cartridge Caring for Data Cartridges Replacing Data Cartridges Problems With Tape Drive Installation TroubleshootingProblems With Tape Drive Operation Problems With Tape Drive Operation Troubleshooting Table A-1 shows the specifications for the 8505XL tape drive Tape Drive SpecificationsAppendix a Tape Drive Specifications

8505XL, 007-3086-001 specifications

The Exabyte 007-3086-001,8505XL is a highly specialized data storage solution that has carved a niche for itself in the world of data management and archiving. Designed primarily for use in high-capacity tape systems, this device combines advanced technology with robust performance characteristics, making it ideal for large-scale data centers and enterprises with significant storage demands.

One of the defining features of the Exabyte 007-3086-001,8505XL is its impressive storage capacity. With the ability to hold up to 8 terabytes of data uncompressed, this device provides ample space for the archiving of extensive datasets, including backups and critical business information. This level of capacity is crucial in an era where data generation is exponential, and organizations require reliable means to manage and store vast amounts of information.

In terms of technology, the Exabyte 007-3086-001,8505XL utilizes advanced tape technology, which enables efficient data retrieval and storage. The device is designed to operate in high-performance environments, boasting a data transfer rate of up to 2.5 MB/s in native format. This translates to reduced backup times, allowing organizations to maintain the integrity and availability of their data with minimal disruption.

The Exabyte 007-3086-001,8505XL is also characterized by its durability and reliability. Built to withstand the rigors of everyday use, the device is designed with a robust chassis that protects against physical wear and environmental factors. This ensures that organizations can depend on their storage solutions over extended periods, minimizing the need for frequent replacements.

Additionally, the easy integration of the Exabyte 007-3086-001,8505XL with existing IT infrastructure is another highlight. Its compatibility with various operating systems and backup software allows for seamless implementation, enabling enterprises to upgrade their data storage capabilities without significant additional investments.

Overall, the Exabyte 007-3086-001,8505XL represents a powerful and effective solution for organizations looking to enhance their data storage capacities. With its high storage capacity, advanced technology, durability, and integration capabilities, this device is poised to meet the evolving demands of data management in a rapidly changing digital landscape. As the need for reliable and efficient data storage continues to grow, products like the Exabyte 007-3086-001,8505XL will play a vital role in shaping the future of enterprise data management.