7 Testing the library and resuming operation
11.Press [ENTER] and use the arrow keys to select SCSI mode. Press [ENTER] again.
If the library does not operate correctly, check the following:
SCSI library | Fibre Channel library |
✃ Are the devices on each SCSI bus attached to | ✃ Are the GBICs and cables used to connect the |
the library all LVD? | tape drives to the Fibre Channel loop |
| compatible? |
✃ Are the SCSI buses terminated? |
|
| ✃ Are the Fibre Channel cables firmly connected |
✃ Are the SCSI cables firmly connected to the | to the library, tape drives, and the Fibre Channel |
library, tape drives, and host computer? | hub or switch? |
✃ Are the SCSI IDs unique for the devices on each | ✃ Is the library operating in the correct control |
SCSI bus? | mode? (For most applications, the control |
| mode should be set to SCSI.) |
✃ Is the library operating in the correct control |
|
mode? (For most applications, the control |
|
mode should be set to SCSI.) |
|
|
|
If you cannot solve the problem yourself, contact your service provider or Exabyte Technical Support
March 2002 | Page 11 of 12 |