Front Panel Control, ∙ Power Button | Envision Peripherals EN9600

FRONT PANEL CONTROL

∙Power Button:

Press this button to turn the monitor ON or OFF.

∙Power Indicator:

Blue		Power On mode.
Orange		Off mode.

∙MENU / ENTER :

Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status.

∙Brightness :

Adjust brightness or function adjust.

∙Contrast :

Adjust contrast or function adjust.

∙Auto Adjust button / Exit:

1.When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).

2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.

The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

OSD Lock Function:To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monit on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

NOTES

∙Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or exce dust or mechanical vibration or shock.

∙Save the original shipping carton and packing materials, as they wil come in handy if you ever have to ship your monitor.

∙For maximum protection, repackage your monitor as it was originally packed at the factory.

∙To keep the monitor looking new, periodically clean it with a soft cl Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.