Envision Peripherals EN9410 user manual Precautions

Page 3

PRECAUTIONS:

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet or ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short

ii

Image 3
Contents By Envision Peripherals Inc EN9410FCC Class B Radio Frequency Interference Statement For Your SafetyPrecautions Iii General Notes Other Notes Disclaimer Monitor InformationDealer Information Table of Contents Important Safety Instructions On Screen Display Auto Adjustment FunctionPower Saving High Quality ExpansionUnpacking the Monitor Installation and Removal of the BaseHardware Installation Windows driver Installation Windows 98, ME,Windows XP Click OK to close Display Properties Setting the Display ResolutionPlease Note Supported Graphics Modes and Refresh Rate SelectionIncoming display mode Input timing Picture Optimisation Adjusting the MonitorOSD Menu Clock User defined Color Adjustment OtherImage is blurred, how can I get the best quality picture? Frequently Asked QuestionsImage is displaced in one direction Display shows no Signal error messageNo image is displayed, what can I do? Image is or distorted, flashes or flickersDisplay shows OUT of Frequency error message On-Screen Display Functions Controls Mains power switch, AutomaticImage Position, Phase, Pixel ModelLine Frequency Video SignalSignal Connection Safety CSA, cULus, TUV/GS