Envision Peripherals EN7400e user manual Install An Optional Wall Mounting Arm Not supplied

Before You Operate the Monitor EN7400e

Install An Optional Wall Mounting Arm (Not supplied)

Follow these steps to finish installing the wall mounting arm:

1.Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.

2.Insert the 4 screws into the holes and tighten.

3.Insert the power cable into the slot on the back of the monitor.

The Envisionl EN7400e is compatible with the Ergotron line of mounting and arm solutions.

Contact Ergotron at 800-888-8458 or visit their web site at www.ergotron.com for more information on the many ways on which you can mount your Envision LCD monitor.

EN7400e 8 12OCT04