Envision Peripherals EN-770e General Notes, Using the Right Power Cord, General Features

For Your Safety EN-770e

General Notes

•Do not install the monitor near heat sources such as radiators or air ducts.

•Do not place monitor in direct sunlight or in areas with excessive dust, mechanical vibration or shock.

•Save the original shipping carton and packing materials in case you need to ship your monitor. Be sure to repackage your monitor as it was originally packed at the factory.

•Periodically clean your monitor with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution.

Never use strong solvents such as thinners, benzene, or abrasive cleaners, since these will damage the cabinet. Always unplug the monitor before cleaning it.

Using the Right Power Cord

The supplied power cord is a NEMA 5-15 style plug. It is UL-listed and CSA labeled for

125 volts AC.

If the monitor will be connected to your computer’s power outlet, use a minimum No. 18 AWG, type SJT or SVT three conductors cord with one end terminating with a male grounded plug, rated 10A, 250V, CEE-22. The other end must terminate with

amolded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration.

General Features:

•17" (43.2 cm) Color Monitor

•Crisp, Clear Display for Windows

•Supports Resolutions up to 1280 X 1024 pixels @60Hz

•EPA ENERGY STAR®

Package Contents

The box that your monitor was shipped in should have included the following items:

1.EN-770e Color Monitor

2.Power Cord

3.Quick Start Guide

4.Booklet

(containing Warranty and Safety information)

EN-770e 4 31MY02