Envision Peripherals EN7220 Operating Instructions Auto Adjust button / Exit, Power Indicator

EN7220

OPERATING INSTRUCTIONS (cont)

•Auto Adjust button / Exit:

1.When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu) or go back to the previous menu.

2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.

The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

•Power Indicator:

Green	—	Power On mode.
Orange	—	Off mode.

•Osd-Lock Function:

To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

15